The standard setting for indoor humidity is between 40–60 percent. You can measure it with a smart thermostat or digital humidity equipment. If you don’t own these devices, there are several clues your home’s humidity level is outside a comfortable range:
We add a whole-home dehumidifier or humidifier as part of your HVAC system and network of air ducts. It regulates humidity as your furnace, heat pump or air conditioner works.
The humidifier utilizes a pad and rotating drum or steaming system to help with moisture levels. It starts by drawing water from an external source, such as a tap or a reservoir, and then vaporizing it into the air. As the water vapor rises, it adds more moisture to the house’s atmosphere. The amount of moisture floating around is supervised by a humidity alarm to allow you to adjust the level of humidity in your home to the percentage you desire. The humidity sensor also helps the humidifier understand when it has to turn off after the desired level has been reached.
Meanwhile, a dehumidifier reverses this process and draws in wet air. It utilizes a fan to force this air over refrigerated evaporator coils, which cools it down. This turns. The dehumidifier then shifts the extra moisture into a pan or drain. For most whole-home systems, this moisture is drained out and away from the home.
Both systems are more efficient than their portable counterparts, which can only handle one room at a time. A whole-home system also requires much less service than a lightweight dehumidifier or humidifier.
© 2024 Service Experts, Service Experts Heating & Air Conditioning, and the Service Experts logo and design are registered trademarks of Service Experts LLC and used under license by SE Canada Inc. All Rights Reserved. *Not applicable to the Advantage Program. See your signed Advantage Program Agreement for full details and exclusions. 100% Satisfaction Guarantee is subject to certain restrictions and limitations as set forth in the applicable Terms and Conditions.